Fasten and Slash procedure is a delightful texture frivolity method that creates a fake chenille impact on texture surface. It includes sewing together at least two layers of texture one on head of the other in equal slanting lines (predisposition) and afterward slicing through the top layers leaving the base layer flawless. A feathery impact like the heap of velvet or chenille is made. 

This method is a lot of utilized by material specialists to give incredible surface and fascinating impacts to their work. It is additionally utilized in sewing and in making home style accessories. You can utilize brightening lines and different embellishments like dab weaving, metallic weaving, precious stones to additionally improve the outside of the work 

The join and slice strategy is utilized in the accompanying manner in decorating articles of clothing. Practically like an opposite applique impact. Texture is removed from the top texture to uncover the underlayer. You can utilize sequinned or beaded texture layer underneath for an unobtrusive however lavish look. 

The subsequent layer is treat sewed to the texture and afterward sewed on checked surfaces. At that point the top layer is removed to uncover the base layer in appealing examples. 

False Chenille texture 

The Slashing strategy is utilized to make a texture that looks a lot of like Chenille texture. At the point when the top layers are cut, after texture layers are sewn together, the cut edges of the texture layers on top are uncovered. They are then made to look frayed by machine washing or hand washing or fomentation with the goal that the string finishes of the apparent multitude of layers are uncovered . They will look fundamentally the same as the heaps of chenille texture ( so the name false chenille) when utilized with suitable textures 

Fundamentally the line and slice work includes this cycle – Layer numerous layers of texture one on head of the other, make a few join on the predisposition grain making channels and afterward slice through the top layers (leaving an a couple of layers whole as base). At the point when upset ( with brushes or by washing in a clothes washer) the cut edges will shred and make a feathery surface. 

Instructions to make the Faux chenille texture (by Stitch and Slash) 

Stage 1 

Select the texture for the layers 

You can layer two texture for an unobtrusive impact. Three layers turns out great with most textures. In excess of three will give you a more rich and fluffier look. Recollect you need to join every one of them together, so don’t go over the edge. 

The base texture ought to be a medium weight texture nothing shaky. You can pick any texture as the base, insofar as it will uphold the layers you intend to keep on top. A Muslin cotton texture is a sheltered and stable decision 

The layers likewise can be any texture which you realize will shred well. You can choose a medium weight inexactly woven texture. 

You should choose textures which function admirably together – For instance select dryclean just texture with machine wash texture for similar layers at your own danger. 

You can test the impact by cutting a little piece askew from the texture you intend to utilize and afterward shake the slice edges to know how they will act. You can likewise wash them to know without a doubt. Does it lighten the manner in which you need it to? In the event that indeed, use it. A few textures like Polyester or textures with spandex may not. 

Contingent upon the texture layers utilized ,their shading, surface and so on the line and cut impact can be fluctuated. It tends to be made to look exceptionally unobtrusive just as emotional. A variegated look can be made by utilizing proper examples and tones. 

Stage 2 

Prewash your texture in the event that you presume that the texture may drain. For textures that you know won’t drain you don’t need to prewash. Press to eliminate wrinkles. 

Stage 3 

Season line along the edges with the goal that the texture layers would not move. 

Imprint inclining lines corresponding to one another 1/2 inch separated. You may need to check Closer lines for meager textures like say 1/4 inch separated . I mark on the rear of the texture on the base layer and join there. 

Line with a short straight or restricted crisscross line up and down the lines. 

Stage 4 

Slice through the layers, utilizing sharp pointed texture 

Addition the scissors edge inside the layers over the base layer and Cut through the diverts in the middle of the sewing lines you have made cautiously, leaving the base layer of texture intact.You need truly sharp scissors for this part. Guarantee that you are not contacting or cutting the base layer anytime 

Stage 5 

You can unsettle the cut edges by scouring them against a texture with unpleasant surface like Denim or utilize a tooth brush or wire brush to shake the filaments. You can wash them in the clothes washer at least multiple times alongside a texture with surface and dry them. All of these activities or anybody of them will make the cut edges sufficiently feathery and fill the channels you have sliced through. The outcome is a delightful sumptuous heaped texture 

Another thought is to Use sewing Machine compel foot to make the chenille impact 

This strategy utilizes the Fringe compel foot to make texture with the fluffy look of a chenille texture. Make texture circles with the assistance of this foot and afterward slice the circles to look like edges or you can utilize framing lines and thick fleecy yarn to make lovely chenille impact texture.